Home | Contact | History | Products | Processes | Sales & Support | Employment
Parts List | Technical Specs | Sales

This rugged and simple scraper-plow combination was originally developed by the British Columbia Department of Transportation in the 1970ís to improve winter driving conditions on the provinces highways and rural routes.  Over its 30 year history it has proven its design strengths with long life and low maintenance costs.  Monashee Manufacturing has been producing the truck snow plow assembly for 7 years, selling over 400 hundred units as well as maintaining an excellent snow plow part inventory to ensure prompt, quality customer service. 
 
Because of the plows placement midway between axels it has the ability to apply significant down pressure for removing hard pack ice and snow while evenly distributing the plowing force over the frame of the truck.  Each plow is fitted with a safety trip mechanism on the cylinder assembly that allows the plow to react efficiently to any immovable objects it may encounter.  It is normally outfitted on tandem axel trucks dump trucks but can be fitted to single axel dump trucks when required.  This is a fixed angle, 10 ft long mould board, able to clear a path 8.5 ft wide and is commonly used with and without additional front plows or wing plows. 
 
Currently our truck snow plow assembly is used by Highways Maintenance Contractors full time in combination with front plows to achieve bare highway conditions even in our peak snowfall season.  It is also popular with cityís and municipalities for its ability to clear narrow and crowded urban streets.

Contact our sales group for pricing and delivery.  Click HERE for Snow Plow Part Finder
 


The UBP1000 shown installed in the up position.

SPECIFICATIONS:
COMPONENTS

REQUIREMENTS

SPECIFICATIONS
BLADE WIDTH: 10 FT.
  THICKNESS: 3/8 "
  MATERIAL TYPE: A36
  DISCHARGE ANGLE: 30 DEGREES (DEPENDING ON TRUCK FRAME WIDTH)
  HEIGHT: 16 3/8" @ INTAKE; 29" @ DISCHARGE
  STYLE: FIXED; ONE WAY
  CUTTING EDGE HOLES: YES - DRILLED FOR CONVENTIONAL CUTTING EDGES
  LIFTING EYES: YES
  GROUND CLEARANCE: 8" WHEN RAISED
CUTTING EDGES NOT INCLUDED: NOT INCLUDED
CYLINDER TYPE: DOUBLE ACTING;  3" BORE;  12" STROKE
  ROD: 1 1/2" DIAMETER
SPRING MATERIAL: 7/8" DIAMETER WIRE
FRAME MOUNTS PLATE MATERIAL: A36
  PLATE THICKNESS: 1/2"
HANGERS MATERIAL: D.O.M. TUBE 3.75" O.D. X 0.375" WALL
  ADJUSTING HOLES: YES
HANGER SHAFTS MATERIAL: 2 15/16" C1018 COLD FINISH ROUND BAR
  ADJUSTING HOLES: YES
PAINT BLADE: SCHOOL BUS YELLOW (STOCK COLOUR)
  OTHER COMPONENTS: BLACK ENAMEL
WEIGHT

ENTIRE UNIT:

1000 LBS

 

© 2001 Monashee Manufacturing Corporation Ltd.
All rights reserved.

 

Sitemap | Home Page | Contact | History | Products | Processes | Sales Support | Employment |